Tricasater setup / camera setup Information

To more desk
- 1 USB connection from each monitor that goes from the monitor to the Tricast

- 1 pair of RCA cables to bring hte sound from the tricaster to the speakers

Wiring to Monitor:

- HDMI out from tricaster to splitter, which feeds the right noitor and the large LCD Monitor

- Make sure that the LCD Monitor is turned on before you boot the tricaster (or you will get flickering until the monitors figure everything out - this will not hurt anything, but looks wierd)

on camera:

- camera now records on 720/60P. (frame size is 720, frames per second is 60)

- click menu then rec/media, then rec/format should be 720/60P 

- HDMI out on the camera now matches 720/60P: click menu > setup > HDMI Resolution, set to 720p/480p

On tricaseter

- all sessions need to be created in 720/60P (every new one)

- good because: uses less hard drive space, and its progressive.  If this ever goes to the web, this will look nice and clean (no wierd interlacing)

- everything is progressive now (what does this mean?)

- Once a session is opened, click hte gear on any camera inputs and

   - click on gear

   - change connection type to 720P Component

   - do that on all cameras

for camera wiring

- HDMI mini from camera to HDMI Standard to a component video converter box to component 

cable which plugs into tircaster