- 1 USB connection from each monitor that goes from the monitor to the Tricast
- 1 pair of RCA cables to bring hte sound from the tricaster to the speakers
Wiring to Monitor:
- HDMI out from tricaster to splitter, which feeds the right noitor and the large LCD Monitor
- Make sure that the LCD Monitor is turned on before you boot the tricaster (or you will get flickering until the monitors figure everything out - this will not hurt anything, but looks wierd)
on camera:
- camera now records on 720/60P. (frame size is 720, frames per second is 60)
- click menu then rec/media, then rec/format should be 720/60P
- HDMI out on the camera now matches 720/60P: click menu > setup > HDMI Resolution, set to 720p/480p
On tricaseter
- all sessions need to be created in 720/60P (every new one)
- good because: uses less hard drive space, and its progressive. If this ever goes to the web, this will look nice and clean (no wierd interlacing)
- everything is progressive now (what does this mean?)
- Once a session is opened, click hte gear on any camera inputs and
- click on gear
- change connection type to 720P Component
- do that on all cameras
for camera wiring
- HDMI mini from camera to HDMI Standard to a component video converter box to component
cable which plugs into tircaster
